MIG MAG WELDING
At a glance
▪ Pulse at its best.
Highly developed processor technology provides for the seamless interaction of all parameters and components involved in the welding process. The result of this smooth interaction are superior duty cycle levels and maximum productivity.
▪ Digital-intelligent process technology.
Whether you opt for the standard Lorch processes SpeedPulse XT, TwinPuls XT, SpeedArc, SpeedArc XT, Pulse and TwinPuls or the optional upgrades SpeedUp, SpeedCold, SpeedPulse and SpeedRoot: you will weld faster and produce results of premium quality with little spatter.
▪ Intuitive operation.
The easy-to-read operating panel and the clearly structured user interface ensure that you are ready to start welding without having to make any additional preparations.
▪ Versatility.
The machines included in Lorch’s S-XT series operate equally well with mixed gas and CO₂.
▪ Adaptable.
Every welding machine included in Lorch’s S-XT series is fully customisable, allowing you to find the machine that matches your welding requirements perfectly. This also holds true for the selection of the wire feeder systems. When ordering your machine, you can choose between a compact or wire feeder system and a dual wire feeder variant.
▪ Tiptronic job memory.
Use the Tiptronic facility to save your ideal setting for each weld so that you can effortlessly retrieve your settings at the machine or the Powermaster torch when performing recurring welding tasks.
▪ Job tool.
PC software for saving and editing welding tasks (jobs) stored in the welding machine along with their parameter settings and for transferring them to additional power sources.
▪ Energy-efficient.
Lorch’s S-XT series marries power with efficient inverter technology and on-demand functionality. Slash your costs and produce exceptional welding results at the same time.
▪ EN 1090-certified.
The EN 1090 WPS package accompanying the Lorch S-XT series helps you save time and money as it eliminates the need for individual tests of your Welding results. The package is comprised of welding instructions that apply to all relevant standard welding processes and have been certified by an approved and independent authority.
▪ Mobility.
Our mobile version of the S-XT series with trolley wheelset will meet all your mobility needs as it allows you to both carry the unit and move it on its wheels.
Operating concept [XT]
▪ “3 steps to weld” operating concept
▪ Synergy control
▪ Display-controlled user prompting
▪ straightforward process and program selection
▪ Infinitely adjustable welding current setting
▪ Quatromatic mode (program sequence control at a push of the torch button)
▪ Arc dynamic control (for Synergic, SpeedArc XT, SpeedPulse XT, TwinPuls XT)
▪ arc length can be adjusted specifically for starting, welding and end phases
▪ Tiptronic job memory for 100 welding tasks
▪ digital volt-ampere display
▪ Possibility for connection of the Lorch Powermaster remote control torch
S 3 mobile-XT
Technical data
Welding current MIG-MAG [A] : 25 – 320
Current at 100 % duty cycle [A] : 250
Current at 60 % duty cycle [A] : 280
Duty cycle I max. [%] : 40
Mains voltage [V] : 3~400
Permitted mains tolerance [%] : ± 15
Mains fuse, delayed action [A] : 16
Dimensions compact system (L × W × H) [mm] : 812 × 340 × 518
Weight – compact system, gas-cooled [kg] : 34
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
S 3-XT
Technical data
Welding current MIG-MAG [A] : 25 – 320
Current at 100 % duty cycle [A] : 250
Current at 60 % duty cycle [A] : 280
Duty cycle I max. [%] : 40
Mains voltage [V] : 3~400
Permitted mains tolerance [%] : ± 15
Mains fuse, delayed action [A] : 16
Dimensions compact system (L × W × H) [mm] : 1116 × 463 × 812
Dimensions wire feeder system (L × W × H) [mm] : 1116 × 445 × 855
Weight – compact system, gas-cooled [kg] : 92.8
Weight – wire feeder [kg] : 20.2
Weight – water cooling (filled) [kg] : 14.7
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
S 5-XT
Technical data
Welding current MIG-MAG [A] : 25 – 400
Current at 100 % duty cycle [A] : 320
Current at 60 % duty cycle [A] : 350
Duty cycle I max. [%] : 50
Mains voltage [V] : 3~400
Permitted mains tolerance [%] : ± 15
Mains fuse, delayed action [A] : 32
Dimensions compact system (L × W × H) [mm] : 1116 × 463 × 812
Dimensions wire feeder system (L × W × H) [mm] : 1116 × 445 × 855
Weight – compact system, gas-cooled [kg] : 97.3
Weight – wire feeder [kg] : 20.2
Weight – water cooling (filled) [kg] : 14.7
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
S 8-XT
Technical data
Welding current MIG-MAG [A] : 25 – 500
Current at 100 % duty cycle [A] : 400
Current at 60 % duty cycle [A] : 500
Duty cycle I max. [%] : 60
Mains voltage [V] : 3~400
Permitted mains tolerance [%] : ± 15
Mains fuse, delayed action [A] : 32
Dimensions compact system (L × W × H) [mm] : 1116 × 463 × 812
Dimensions wire feeder system (L × W × H) [mm] : 1116 × 445 × 855
Weight – compact system, gas-cooled [kg] : 107.3
Weight – wire feeder [kg] : 20.2
Weight – water cooling (filled) [kg] : 14.7
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
At a glance
▪ Digital-intelligent process technology.
Whether you opt for the standard SpeedArc XT (P Basic with SpeedArc Basic) or the optional Lorch Speed upgrades SpeedRoot, SpeedUp and SpeedCold: you will weld faster and produce results of premium quality with little spatter.
▪ Intuitive operation.
The easy-to-read operating panel and the clearly structured user interface afford you maximum ease of use and ensure that you are ready to start welding without having to make any additional preparations.
▪ Versatility.
The machines included in Lorch’s P-series operate equally well with mixed gas and CO₂.
▪ Adaptable.
Every welding machine included in Lorch’s P-series is fully customisable,allowing you to find the machine that matches your welding requirements perfectly.This also holds true for the selection of the wire feeder systems.
▪ EN 1090-certified.
As synergic control and automatic setting control are built in, Lorch’s P series is guaranteed to produce welding results that are in conformity with the EN 1090. Combine your machine with Lorch’s special offer EN 1090 WPS package, and you are ready to handle any welding task they can throw at you.
▪ Tiptronic job memory.
Use the Tiptronic facility to save your ideal setting for each weld so that you can effortlessly retrieve your settings at the machine or the Powermaster torch when performing recurring welding tasks.
▪ Job tool.
PC software for saving and editing welding tasks (jobs) stored in the welding machine along with their parameter settings and for transferring them to additional power sources.
▪ Compact.
All machines of the Lorch P series with a power output of up to 550 amperes are also available with a compact housing. This variant comes with a feeder that is built into the machine. This space-saving design allows you to stow your unit under the workbench or use it as a storage surface for equipment that you can place on its top.
▪ Mobility.
Our mobile version of the P series with trolley wheel set will meet all your mobility needs as it allows you to both carry the unit and move it on its wheels.
▪ Energy-efficient.
Lorch’s P series marries power with efficient inverter technology and on-demand functionality. Slash your costs and produce exceptional welding results at the same time.
Operating concepts [Basic]
▪ “3 steps to weld” operating concept with SpeedArc
▪ Easy power and feed speed regulation
▪ Quatromatic mode (program sequence control at a push of the torch button)
▪ digital volt-ampere display
▪ Possibility for connection of the Lorch Powermaster remote control torch
P 3000 mobile basic
Technical data
Welding current MIG-MAG [A] : 25 – 300
Current at 100 % duty cycle [A] : 250
Current at 60 % duty cycle [A] : 280
Duty cycle I max. [%] : 50
Mains voltage [V] : 3~400
Permitted mains tolerance [%] : ± 15
Mains fuse, delayed action [A] : 16
Dimensions compact system (L × W × H) [mm] : 812 × 340 × 518
Weight – compact system, gas-cooled [kg] : 34
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
P 3500 basic
Technical data
Welding current MIG-MAG [A] : 25 – 350
Current at 100 % duty cycle [A] : 260
Current at 60 % duty cycle [A] : 300
Duty cycle I max. [%] : 30
Mains voltage [V] : 3~400
Permitted mains tolerance [%] : ± 15
Mains fuse, delayed action [A] : 16
Dimensions compact system (L × W × H) [mm] : 1116 × 463 × 812
Dimensions wire feeder system (L × W × H) [mm] : 1116 × 445 × 855
Weight – compact system, gas-cooled [kg] : 92.8
Weight – wire feeder [kg] : 20.2
Weight – water cooling (filled) [kg] : 14.7
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
P 4500 Basic
Technical data
Welding current MIG-MAG [A] : 25 – 450
Current at 100 % duty cycle [A] : 360
Current at 60 % duty cycle [A] : 400
Duty cycle I max. [%] : 30
Mains voltage [V] : 3~400
Permitted mains tolerance [%] : ± 15
Mains fuse, delayed action [A] : 32
Dimensions compact system (L × W × H) [mm] : 1116 × 463 × 812
Dimensions wire feeder system (L × W × H) [mm] : 1116 × 445 × 855
Weight – compact system, gas-cooled [kg] : 97.3
Weight – wire feeder [kg] : 20.2
Weight – water cooling (filled) [kg] : 14.7
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
P 5500 Basic
Technical data
Welding current MIG-MAG [A] : 25 – 550
Current at 100 % duty cycle [A] : 400
Current at 60 % duty cycle [A] : 500
Duty cycle I max. [%] : 30
Mains voltage [V] : 3~400
Permitted mains tolerance [%] : ± 15
Mains fuse, delayed action [A] : 35
Dimensions compact system (L × W × H) [mm] : 1116 × 463 × 812
Dimensions wire feeder system (L × W × H) [mm] : 1116 × 445 × 855
Weight – compact system, gas-cooled [kg] : 107.3
Weight – wire feeder [kg] : 20.2
Weight – water cooling (filled) [kg] : 14.7
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
At a glance
▪ Pulse arc.
Minimum rework. Easy to set up and robust, the pulse process integrated into the MicorMIG Pulse now lets you weld with next to no spatter especially in the transition arc. This cuts down the need for extensive rework and saves valuable time during a welding wire change. What is more, MicorMIG Pulse includes all of the well known functions packed into the MicorMIG series.
▪ Enhanced performance thanks to MicorBoost.
Our MicorBoost technology affords you even greater effectiveness at a higher degree of efficiency when completing MIG-MAG welding tasks. Moreover, fast-action control technology provides for a perfect droplet transition of the pulse arc.
▪ Upgradability.
It has never been easier to adjust a welding system to the constantly changing requirements in the welding industry and to add on welding processes, welding programs and features that will streamline your workflows.
▪ Ready for Speed.
Take your productivity to the next level by adding the optional Lorch Speed processes “SpeedUp” and “SpeedArc” to your MicorMIG Pulse.
▪ EN 1090-certified.
Effortlessly weld in conformity with EN 1090 specifications thanks to the synergic function and automatic setting control. Combine your machine with Lorch’s special offer EN 1090 package as well as parameter setting control by NFC cards, and you are ready to handle any welding task they can throw at you.
▪ Job management.
You can use the ControlPro operating panel to write any welding job you have set up to a blank NFC card and retrieve the stored information at any Lorch MicorMIG power source (BasicPlus or greater) whenever you need it.
▪ Welder identification made easy.
This feature makes the assignment of set-up and operating rights completely painless. The contact-less data transfer option available for Lorch’s MicorMIG Pulse series makes it possible to identify the welder at any time.
Operating concepts [BasicPlus]
▪ “3 steps to weld” operating concept
▪ Infinitely adjustable welding current setting
▪ Digital volt-ampere display
▪ Activation of end crater filling as necessary
▪ 7-stage arc dynamic control
▪ Automatic setting control (synergy control)
▪ Welding program selection in the feed compartment
▪ Upgradability
MicorMIG Pulse 300 BasicPlus
Technical data
Welding current MIG-MAG [A] : 25 – 300
Current at 100 % duty cycle [A] : 200
Current at 60 % duty cycle [A] : 250
Duty cycle I max. [%] : 45
Mains voltage [V] : 3~400
Permitted mains tolerance [%] : ± 15
Mains fuse, delayed action [A] : 32
Dimensions compact system (L × W × H) [mm] : 880 × 400 × 755
Dimensions wire feeder system (L × W × H) [mm] : 880 × 490 × 890
Weight – compact system, gas-cooled [kg] : 58
Weight – wire feeder [kg] : 10.6
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
MicorMIG Pulse 350 BasicPlus
Technical data
Welding current MIG-MAG [A] : 25 – 350
Current at 100 % duty cycle [A] : 250
Current at 60 % duty cycle [A] : 300
Duty cycle I max. [%] : 45
Mains voltage [V] : 3~400
Permitted mains tolerance [%] : ± 15
Mains fuse, delayed action [A] : 32
Dimensions compact system (L × W × H) [mm] : 880 × 490 × 855
Dimensions wire feeder system (L × W × H) [mm] : 880 × 490 × 955
Weight – compact system, gas-cooled [kg] : 58
Weight – wire feeder [kg] : 10.6
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
MicorMIG Pulse 400 BasicPlus
Technical data
Welding current MIG-MAG [A] : 30 – 400
Current at 100 % duty cycle [A] : 300
Current at 60 % duty cycle [A] : 370
Duty cycle I max. [%] : 45
Mains voltage [V] : 3~400
Permitted mains tolerance [%] : ± 15
Mains fuse, delayed action [A] : 32
Dimensions compact system (L × W × H) [mm] : 880 × 490 × 855
Dimensions wire feeder system (L × W × H) [mm] : 880 × 490 × 955
Weight – compact system, gas-cooled [kg] : 61
Weight – wire feeder [kg] : 10.6
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
MicorMIG Pulse 500 BasicPlus
Technical data
Welding current MIG-MAG [A] : 30 – 500
Current at 100 % duty cycle [A] : 370
Current at 60 % duty cycle [A] : 430
Duty cycle I max. [%] : 45
Mains voltage [V] : 3~400
Permitted mains tolerance [%] : ± 15
Mains fuse, delayed action [A] : 32
Dimensions compact system (L × W × H) [mm] : 880 × 490 × 855
Dimensions wire feeder system (L × W × H) [mm] : 880 × 490 × 955
Weight – compact system, gas-cooled [kg] : 66
Weight – wire feeder [kg] : 10.6
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
At a glance
▪ Versatility.
Lorch’s MicorMIG is set apart by the exceptional MIG-MAG welding characteristics it delivers –
regardless of whether the welder uses mixed gas or CO₂.
▪ Dynamic control.
Select the arc characteristic you prefer. Depending on the operating panel you have selected, you can opt
for dynamic levels that range from “soft” to “hard”.
▪ Synergic pre-selection.
MicorMIG versions BasicPlus and greater offer a large number of welding programs for various material,
wire and gas combinations. Depending on the design of your machine, you can set the programs in the
wire feed compartment of the case or in the wire feed compartment of the compact system.
▪ Upgradability.
Never before has it been easier to adjust a welding machine to the ever increasing challenges posed by
today’s welding tasks. It is now a breeze to upload welding processes, welding programs and functions to
the MicorMIG that both boost performance and streamline the workflow.
▪ Enhanced performance thanks to MicorBoost.
Our MicorBoost technology affords you even greater effectiveness at a higher degree of efficiency when
completing MIG-MAG welding tasks. Better still, you will also be able to draw on higher voltage reserves
when you need to produce perfect electrode welding results – even if using CEL and special electrodes.
▪ EN 1090-certified.
Effortlessly weld in conformity with EN 1090 specifications thanks to the synergy function and automatic
setting control. Combine your machine with Lorch’s special offer EN 1090 package as well as parameter
setting control by NFC cards, and you are ready to handle any welding task they can throw at you.
▪ Ready for Speed.
Complete your welding jobs with even greater ease and speed by implementing optional Lorch Speed
upgrades into your MicorMIG machine.
▪ Job management.
The ControlPro display with Tiptronic function makes it a snap to store welding tasks and retrieve and
transfer them to other machines as necessary.
▪ Welder identification made easy.
This feature makes the assignment of set-up and operating rights completely painless. The no-contact data
transfer option available for Lorch’s MicorMIG series makes it possible to identify the welder at any time.
▪ Gouging.
The MicorMIG stands out from the rest by its ability to weld electrodes including special electrodes,
which it can gouge (starting at 400 A) and weld when combined with the optional Electrode Plus upgrade.
Operating concepts [Basic]
▪ “3 steps to weld” operating concept
▪ Infinitely adjustable welding current setting
▪ Digital volt-ampere display
▪ Activation of end crater filling as necessary
▪ 3-stage arc dynamic control
MicorMIG 300 BasicPlus
Technical data
Welding current MIG-MAG [A] : 25 – 300
Current at 100 % duty cycle [A] : 200
Current at 60 % duty cycle [A] : 250
Duty cycle I max. [%] : 45
Mains voltage [V] : 3~400
Permitted mains tolerance [%] : ± 15
Mains fuse, delayed action [A] : 32
Dimensions compact system (L × W × H) [mm] : 880 × 400 × 755
Dimensions wire feeder system (L × W × H) [mm] : 880 × 490 × 890
Weight – compact system, gas-cooled [kg] : 58
Weight – wire feeder [kg] : 10.6
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
MicorMIG 350 BasicPlus
Technical data
Welding current MIG-MAG [A] : 25 – 350
Current at 100 % duty cycle [A] : 250
Current at 60 % duty cycle [A] : 300
Duty cycle I max. [%] : 45
Mains voltage [V] : 3~400
Permitted mains tolerance [%] : ± 15
Mains fuse, delayed action [A] : 32
Dimensions compact system (L × W × H) [mm] : 880 × 490 × 855
Dimensions wire feeder system (L × W × H) [mm] : 880 × 490 × 955
Weight – compact system, gas-cooled [kg] : 58
Weight – wire feeder [kg] : 10.6
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
MicorMIG 400 BasicPlus
Technical data
Welding current MIG-MAG [A] : 30 – 400
Current at 100 % duty cycle [A] : 300
Current at 60 % duty cycle [A] : 370
Duty cycle I max. [%] : 45
Mains voltage [V] : 3~400
Permitted mains tolerance [%] : ± 15
Mains fuse, delayed action [A] : 32
Dimensions compact system (L × W × H) [mm] : 880 × 490 × 855
Dimensions wire feeder system (L × W × H) [mm] : 880 × 490 × 955
Weight – compact system, gas-cooled [kg] : 61
Weight – wire feeder [kg] : 10.6
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
MicorMIG 500 BasicPlus
Technical data
Welding current MIG-MAG [A] : 30 – 500
Current at 100 % duty cycle [A] : 370
Current at 60 % duty cycle [A] : 430
Duty cycle I max. [%] : 45
Mains voltage [V] : 3~400
Permitted mains tolerance [%] : ± 15
Mains fuse, delayed action [A] : 32
Dimensions compact system (L × W × H) [mm] : 880 × 490 × 855
Dimensions wire feeder system (L × W × H) [mm] : 880 × 490 × 955
Weight – compact system, gas-cooled [kg] : 66
Weight – wire feeder [kg] : 10.6
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
At a glance
▪ MIG-MAG logic.
Electronic MIG-MAG logic with 2- / 4-step function and adjustable spot and interval control.
▪ Automatic setting control.
The automatic setting control lets you find the welding parameter setting that works best for you.
▪ Intuitive operation.
Thanks to the clearly structured user interface and the slanted operating panel, the device control remains well visible throughout operation and affords the user an ergonomic operating position.
▪ Energy-efficient.
Energy management is a standard feature built into every model of the Lorch M-Pro series. The energy saving features include a fan that starts only when necessary in order to cut down on unnecessary energy consumption during stand-by.
▪ Robust case.
The housing of Lorch’s M-Pro series has been designed specifically to meet the requirements of any workshop environment. This compact and rugged housing allows you to easily stow your power source under the workbench or use its top side as a storage surface for your equipment.
▪ Inclined torch connection.
The inclined torch connection allows for minimal wire resistance and optimum wire guidance.
▪ Wire feeder.
Lorch’s 2-roll or 4-roll precision feeder guarantees fine pressure adjustment, minimal wire deformation and exact wire alignment.
▪ Colour-coded feed rolls.
Lorch’s colour-coded feed rolls of the Lorch M-Pro series represent different wire diameters and make replacing the rolls a walk in the park.
▪ Compartment lighting.
The powerful LEDs integrated into the compartment of the wire feeder make it much easier for you to change the reel and thread in the wire even in complete darkness or low light conditions.
▪ Cylinder trolley.
Thanks to the low receiving surface of Lorch’s cylinder trolley, changing cylinders with a capacity of 50 litres is completely effortless.
Operating concepts [BasicPlus]
▪ “3 steps to weld” operating concept
▪ Automatic setting control (synergy function)
▪ including 2-roll wire feeder
▪ user-oriented guidance using illuminated symbols
▪ Switch-over 2-cycle / 4-cycle / spot welding / interval welding
M-Pro 170
BasicPlus
Technical data
Welding range
Weldable materials : Steel, stainless steel, aluminium
MIG-MAG [A] : 25 – 170
Voltage adjustment : 6 levels
Duty cycle I max. (25 °C | 40 °C) [%] : 25 | 15
Current at 100 % duty cycle (25 °C | 40 °C) [A] : 90 | 70
Welding wires
Steel Ø [mm] : 0.6 – 0.8
Aluminium Ø [mm] : 1.0
CuSi Ø [mm] : −
Weldable material thickness
Steel [mm] : 0.8 – 6.0
Aluminium [mm] : 2.0 – 4.0
Machine
Mains voltage [V] : 1~230/2~400
Mains fuse : 16 A, delayed action
Mains plug : Schuko + CEE16
Dimensions (L × W × H) [mm] : 880 × 400 × 755
Weight [kg] : 65
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
M-Pro 210
BasicPlus / ControlPro
Technical data
Welding range
Weldable materials : Steel, stainless steel, aluminium
MIG-MAG [A] : 25 – 170
Voltage adjustment : 6 levels
Duty cycle I max. (25 °C | 40 °C) [%] : 25 | 15
Current at 100 % duty cycle (25 °C | 40 °C) [A] : 90 | 70
Welding wires
Steel Ø [mm] : 0.6 – 0.8
Aluminium Ø [mm] : 1.0
CuSi Ø [mm] : −
Weldable material thickness
Steel [mm] : 0.8 – 6.0
Aluminium [mm] : 2.0 – 4.0
Machine
Mains voltage [V] : 1~230/2~400
Mains fuse : 16 A, delayed action
Mains plug : Schuko + CEE16
Dimensions (L × W × H) [mm] : 880 × 400 × 755
Weight [kg] : 65
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
M-Pro 250 Mobile
BasicPlus / ControlPro
Technical data
Welding range
Weldable materials : Steel, stainless steel, aluminium
MIG-MAG [A] : 30 – 250
Voltage adjustment : 12/21* levels
Duty cycle I max. (25 °C | 40 °C) [%] : 35 | 25
Current at 100 % duty cycle (25 °C | 40 °C) [A] : 185 | 150
Welding wires
Steel Ø [mm] : 0.6 – 1.0
Aluminium Ø [mm] : 1.0 – 1.2
CuSi Ø [mm] : −
Weldable material thickness
Steel [mm] : 0.8 – 10.0
Aluminium [mm] : 2.0 – 6.0
Machine
Mains voltage [V] : 3~400
Mains fuse : 16 A, delayed action
Mains plug : CEE16
Dimensions (L × W × H) [mm] : 880 × 400 × 755
Weight [kg] : 71
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
M-Pro 300 Mobile
BasicPlus / ControlPro
Technical data
Welding range
Weldable materials : Steel, stainless steel, aluminium
MIG-MAG [A] : 30 – 300
Voltage adjustment : 12/21* levels
Duty cycle I max. (25 °C | 40 °C) [%] : 35 | 25
Current at 100 % duty cycle (25 °C | 40 °C) [A] : 205 | 170
Welding wires
Steel Ø [mm] : 0.6 – 1.2
Aluminium Ø [mm] : 1.0 – 1.2
CuSi Ø [mm] : −
Weldable material thickness
Steel [mm] : 0.8 – 12.0
Aluminium [mm] : 2.0 – 8.0
Machine
Mains voltage [V] : 3~400
Mains fuse : 16 A, delayed action
Mains plug : CEE16
Dimensions (L × W × H) [mm] : 880 × 400 × 755
Weight [kg] : 80
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
M-Pro 150 CuSi Mobile
BasicPlus / ControlPro
Technical data
Welding range
Weldable materials : Steel, stainless steel, aluminium, galvanised
and high-alloyed sheets
MIG-MAG [A] : 15 – 150
Voltage adjustment : 7 levels
Duty cycle I max. (25 °C | 40 °C) [%] : 60 | 40
Current at 100 % duty cycle (25 °C | 40 °C) [A] : 120 | 100
Welding wires
Steel Ø [mm] : 0.6 – 0.8
Aluminium Ø [mm] : 0.8 – 1.0
CuSi Ø [mm] : 0.8 – 1.0
Weldable material thickness
Steel [mm] : 0.5 – 6.0
Aluminium [mm] : 2.0 – 5.0
Machine
Mains voltage [V] : 3~400
Mains fuse : 16 A, delayed action
Mains plug : CEE16
Dimensions (L × W × H) [mm] : 880 × 400 × 755
Weight [kg] : 66
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
M-Pro 200 CuSi Mobile
ControlPro
Technical data
Welding range
Weldable materials : Steel, stainless steel, aluminium, galvanised
and high-alloyed sheets
MIG-MAG [A] : 15 – 200
Voltage adjustment : 12/21* levels
Duty cycle I max. (25 °C | 40 °C) [%] : 30 | 20
Current at 100 % duty cycle (25 °C | 40 °C) [A] : 125 | 100
Welding wires
Steel Ø [mm] : 0.6 – 1.0
Aluminium Ø [mm] : 0.8 – 1.2
CuSi Ø [mm] : 0.8 – 1.0
Weldable material thickness
Steel [mm] : 0.5 – 8.0
Aluminium [mm] : 2.0 – 6.0
Machine
Mains voltage [V] : 3~400
Mains fuse : 16 A, delayed action
Mains plug : CEE16
Dimensions (L × W × H) [mm] : 880 × 400 × 755
Weight [kg] : 68
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
At a glance
▪ Durable, robust, and simply exceptional.
The welding machines included in the M Series afford MIG-MAG welders superior ease of use at an affordable cost.
▪ Automatic setting control.
Allowing you to automatically adjust the wire feed speed to the selected voltage level, the Lorch M series makes it a cinch to find the perfect operating point.
▪ Quality wire feeder.
The Lorch M 222 and M 242 ship with a 2-roll wire feeder, while the M 304 comes standard with a 4-roll wire feeder.
▪ Robust case.
Boasting a compact and rugged housing supported on four stable wheels, the Lorch M can easily be stowed under the workbench or used as a storage surface as it allows you to place your equipment on its top.
▪ Double chain gas cylinder lock.
Designed to offer maximum safety, the Lorch M series is furnished with a double chain gas cylinder lock.
These features allow you to safely move your power source including gas cylinder (holding up to 20 litres).
▪ Welding characteristics.
Excellent welding performance on steel, stainless steel and aluminium.
▪ Operating modes.
Setting options for 2-cycle tack welding and 4-cycle continuous welding or spots for spot welding with freely adjustable spot time.
Operating concept
▪ “3 steps to weld” operating concept
▪ with automatic setting control
▪ 2-cycle, 4-cycle and spot welding
M 222
Technical data
Weldable materials : Steel / stainless steel / aluminium
Welding range [A] : 25 – 210
Voltage adjustments [Levels] : 6
Duty cycle I max. (40 °C) [%] : 15
Current at 60 % duty cycle (40 °C) [A] : 125
Wire feed rolls : 2
Weldable wires, steel Ø [mm] : 0.6 – 1.0
Weldable wires, aluminium Ø [mm] : 1.0 – 1.2
Recommended material thickness, steel [mm] : 0.8 – 8.0
Recommended material thickness, aluminium [mm] : 2.0 – 5.0
Mains voltage [V] : 1~230/2~400
Mains fuse, delayed action [A] : 16
Mains plug : Schuko + CEE16
Dimensions (L × W × H) [mm] : 870 × 390 × 610
Weight [kg] : 55
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
M 242
Technical data
Weldable materials : Steel / stainless steel / aluminium
Welding range [A] : 30 – 230
Voltage adjustments [Levels] : 7
Duty cycle I max. (40 °C) [%] : 20
Current at 60 % duty cycle (40 °C) [A] : 155
Wire feed rolls : 2
Weldable wires, steel Ø [mm] : 0.6 – 1.0
Weldable wires, aluminium Ø [mm] : 1.0 – 1.2
Recommended material thickness, steel [mm] : 0.8 – 10.0
Recommended material thickness, aluminium [mm] : 2.0 – 6.0
Mains voltage [V] : 3~400
Mains fuse, delayed action [A] : 16
Mains plug : CEE16
Dimensions (L × W × H) [mm] : 870 × 390 × 610
Weight [kg] : 57
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator
M 304
Technical data
Weldable materials : Steel / stainless steel / aluminium
Welding range [A] : 30 – 290
Voltage adjustments [Levels] : 12
Duty cycle I max. (40 °C) [%] : 20
Current at 60 % duty cycle (40 °C) [A] : 175
Wire feed rolls : 4
Weldable wires, steel Ø [mm] : 0.8 – 1.2
Weldable wires, aluminium Ø [mm] : 1.0 – 1.2
Recommended material thickness, steel [mm] : 0.8 – 12.0
Recommended material thickness, aluminium [mm] : 2.0 – 8.0
Mains voltage [V] : 3~400
Mains fuse, delayed action [A] : 16
Mains plug : CEE16
Dimensions (L × W × H) [mm] : 870 × 390 × 610
Weight [kg] : 67
Include Accessories :
▪ MIG Gun
▪ Ground cable
▪ Ground clamp
▪ Gas regulator